Quality & Safety Policy

Quality Policy

A detailed in-house quality reporting system has been developed, the objective being to check and record that each stage of work confirms to certain defined parameters. These parameters are compiled by collecting our company wide years of experience of common errors and client requirements. Similarly for safety a few well defined measures are documented and followed very closely. For maintaining both the above an independent Q.C./Safety Engineer visits the site.

Sadbhawana Construction ensures that the associated procedures apply to all activities and work undertaken within the company. Our team can demonstrate its ability to consistently meet customer, statutory and regulatory requirements together with its commitment to enhance customer satisfaction through conformity with client needs and continual improvement of our system.

Sadbhawana Construction Success is based on the quality and commitment of its experienced and professional management and construction personnel and is committed to:

- Continue to fully meet the requirement of client.

- Setting and monitoring targets, objectives and reduce incidents and customer complaints.

- Identify improvements to existing working practices.

- Provide a quality project management service though the delivery of projects and end products.

- Continually evaluate the effectiveness of

- HSQE plans, work package plans and task briefing sheet, etc.

- All employees & sub-contractors must understand client's requirements.

- Be accountable & responsible for the quality of service and quality of work.

Safety Policy

It shall ensure that:

- Workers and visitors are given Helmets while working/Visiting at site.
- Safety shoes shall be worn by worker as required.
- Safety belt will be used while working at height.
- Depending on the nature of work being carried out workers will be issued gloves, eye glasses etc. as required.
- Caution tape barricading will be done at site at required location to aware the workers.
- Adequate fire fighting equipment shall be available at site for initial prompt response.
- Banners and posters shall be displayed at the project site to educate the workers on safety and health.
- Smoking and alcoholic shall be prohibited at site.
- Proper barricading of the project site shall be carried out at all times.
- First aid box shall be available at site.
- One dedicated safety officer at every site.
- On regular basis safety Mock drill.

Personal Protective Equipment (PPE) for Construction Required personnel protection equipment (PPE) must be worn at all times when on construction or renovation sites.
At a minimum, each employee is required to wear a hard hat and safety glasses. High visibility safety vests with reflective striping are required when employees are exposed to vehicular traffic.
In the absences of vehicular traffic, high visibility shirts should be worn at all times. All workers must wear shirts with sleeves, long work
 
- pants, and sturdy work shoes or boots when working on a construction or renovation site.
- Sleeveless or tank top shirts, short pants, sweatpants, sneakers, sandals, and high-heeled or open-toed shoes are not permitted.
- Depending on the circumstances and potential hazards present, additional PPE may be required. This determination will by made by your supervisor based on the preliminary Job Hazard Analysis,
- EHS may also be consulted. Additional PPE may include:
- Protective gloves Hearing protection
- Full face shields when cutting, grinding, or chipping
- Chemical splash goggles Respiratory protection
- Fall protection equipment when working above 6 feet
- Specific protective clothing such as welding leathers when welding or FR clothing when working with live electric